60w co2 laser power supply
1. Main Features:
1) High output voltage and current: when inputting AC220V and
outputting current up to 38MA, the voltage can be up to 25KV.
2) Response time: ≤1Ms from the time that switch Signal is given to
the output current up to 90% of the setting current
3) Increase the power of laser: Used with 2000mm laser, the peak of
laser power can be up to 130W and the average power is 100W.
4) Dramatically lengthen the life of laser.
5) Easy Control: The start and stop of laser can be easily
controlled by TTL level. And there are protection switch to test
the external water, ventilation, etc.
6) Easy control of laser power: Both 0-5V analog signal and PWM
signal can control the laser power.
7) The power supply possesses open circuit protection: Under the
condition of good protective earthing, the power supply can work in
open-circuit for a short time, which could avoid the damage of
laser power supply because of the bursting of laser tube, thereby
enhancing the life of power supply.
8) The power supply can take feedback interface which can be used
in closed-loop control and testing the working current of laser.
9) The power supply adds a new function, that is timely scene
judging which part is damaged, laser tube or laser power.
10) Application: thick acrylic cut, fabric cut, etc.
AC220V or AC110V(Please spefify when placing order)
Max Input power
Max Input current
Max Output voltage
Max Output current
DC 24 mA
≤1mS (Time from the TTL Signal is given to the output current up to
90% pre-setting current)
Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is
connected with enclosure.
Operating temperature: (-10-40)°C,Relative humidity: ≤90%
Force-Air Cooling (FAC)
Golden yellow or Black